WAGO

4055143428101

Commercialized

890792

4055143428101

Snap-in plug; 2-pole; Cod. B; 1.5mm2; pink

Notes - Note -- The snap-in connectors must be relieved of tensile and transverse forces.A surface finish can influence the edge radius of the cutouts.This may affect the snap-in socket fit; so ensure an adequate fit before use.In addition; the punched edge should be on the inside for punched cutouts.The wings of the snap-in connectors must not be mechanically stressed for a long period before use (e.g.; due to a pre-locking position).
Electrical data - Ratings per IEC/EN - Ratings per -- IEC/EN 60664-1
Electrical data - Ratings per IEC/EN - Nominal voltage (III/3) -- 250V
Electrical data - Ratings per IEC/EN - Rated impulse voltage (III/3) -- 4kV
Electrical data - Ratings per IEC/EN - Rated current -- 16A
Electrical data - Ratings per IEC/EN - Legend (ratings) -- (III / 3) Overvoltage category III / Pollution degree 3
Electrical data - Ratings per UL 1977 - Note for the US market -- Some versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 5A and voltages up to 600 V. For further information; please contact your local sales office.
Electrical data - Ratings per UL 1977 - Rated voltage (UL 1977) -- 600V
Electrical data - Ratings per UL 1977 - Rated current UL 1977 -- 14A
Electrical data - General information - Note on contact resistance -- approx. 1mΩ of contact resistanceapprox. 0.25mΩ contact transition plug/socket
Connection data - Connection points -- 2
Connection data - Total number of potentials -- 2
Connection data - Connection 1 - Connection technology -- Push-in CAGE CLAMP
Connection data - Connection 1 - Actuation type -- Operating tool / Push-in
Connection data - Connection 1 - Nominal cross-section -- 1.5mm2 / 16 AWG
Connection data - Connection 1 - Solid conductor -- 0.25...1.5mm2 / 22...16 AWG
Connection data - Connection 1 - Solid conductor; push-in termination -- 0.75...1.5mm2 / 20...16 AWG
Connection data - Connection 1 - Stranded conductor -- 0.25...1mm2 / 22...18 AWG
Connection data - Connection 1 - Fine-stranded conductor -- 0.25...1.5mm2 / 22...16 AWG
Connection data - Connection 1 - Fine-stranded conductor; with insulated ferrule -- 0.25...0.75mm2 / 22...20 AWG
Connection data - Connection 1 - Fine-stranded conductor; with uninsulated ferrule -- 0.25...0.75mm2 / 22...20 AWG
Connection data - Connection 1 - Fine-stranded conductor; with ferrule; push-in termination -- 0.75mm2 / 20 AWG
Connection data - Connection 1 - Strip length -- 9mm / 0.35"
Connection data - Connection 1 - Pole number -- 2
Connection data - Connection 1 - Conductor entry direction to mating direction -- 0°
Physical data - Pin spacing -- 4.4mm / 0.173"
Physical data - Width -- 19.8mm / 0.78"
Physical data - Height -- 16mm / 0.63"
Physical data - Depth -- 39.85mm / 1.569"
Mechanical Data - Application -- Control technology
Mechanical Data - Coding -- B
Mechanical Data - Variable coding -- No
Mechanical Data - Marking -- 2 1
Mechanical Data - Potential marking -- 2 1
Mechanical Data - Mating force of a plug-in connection -- approx. 20...70N (depending on pole number)
Mechanical Data - Retention force of a plug-in connection -- Locked > 80N
Mechanical Data - Unmating force of a plug-in connection -- Unlocked approx. 20...70N (depending on pole number)
Mechanical Data - Number of mating cycles -- 200; without resistive load
Mechanical Data - Housing sheet thickness -- 0.5...2mm / 0.02...0.079"
Mechanical Data - Mounting type -- Snap-in flange
Mechanical Data - Protection type -- IP20; IP40 when mated
Plug-in connection - Contact type (pluggable connector) -- Male connector/plug
Plug-in connection - Connector (connection type) -- for conductor
Plug-in connection - Mismating protection -- Yes
Plug-in connection - Note on mismating protection -- All WINSTA components are 100% protected against mismating when a.) plugging different numbers of poles b.) plugging while rotated 180 c.) plugging while laterally staggered d.) plugging one pole
Plug-in connection - Locking lever -- yes
Plug-in connection - Locking of plug-in connection -- locking lever
Plug-in connection - Note on locking system -- All connectors for mounted installations (snap-in versions for lighting fixtures or devices; all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).
Material Data - Color -- pink
Material Data - Cover color -- gray
Material Data - Material group -- I
Material Data - Insulation material -- Polyamide (PA66)
Material Data - Flammability class per UL94 -- V0
Material Data - Clamping spring material -- Chrome-Nickel spring steel (CrNi)
Material Data - Contact material -- Copper or Copper alloy; surface-treated
Material Data - Contact plating -- Tin
Material Data - Fire load -- 0.116MJ
Material Data - Weight -- 4.3g
Environmental requirements - Processing temperature -- -5...+40°C
Environmental requirements - Continuous operating temperature -- -35...+85°C
Environmental requirements - Note on continuous operating temperature -- Insulating parts for temperatures ≤ 105°C
Commercial data - Product Group -- 20 (Winsta)
Commercial data - eClass 10.0 -- 27-44-06-02
Commercial data - eClass 9.0 -- 27-44-06-02
Commercial data - ETIM 8.0 -- EC002566
Commercial data - ETIM 7.0 -- EC002566
Commercial data - PU (SPU) -- 50 (50) pcs
Commercial data - Packaging type -- box
Commercial data - Country of origin -- PL
Commercial data - GTIN -- 4055143428101
Commercial data - Customs tariff number -- 85366990990
Environmental Product Compliance - RoHS Compliance Status -- Compliant;No Exemption

Poland